ASTM SUS 201 AISI 1035 Stainless Steel Round Rod Bar
INTRODUCTION
Stainless steel round bar are widely used in petroleum, chemical,
medical, food, light industry, mechanical instrumentation and other
industrial pipelines and mechanical structural parts. In addition,
when the bending and torsion strength are the same, the weight is
lighter, so it is also widely used in the manufacture of mechanical
parts and engineering structures. It is also often used as
furniture and kitchen utensils.
Applications of AISI 1050 Steel
AISI 1050 grade carbon steel is widely used in machinery
manufacturing, good mechanical properties of this steel.
1050 carbon steel are generally use to make mechanical parts, like
spring, gear, tension bar, the roller, the axis, the load spindle
etc.
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
|---|
| Range | 5mm to 500mm Dia in 100mm to 6000mm Length |
|---|
| Diameter | 10 mm To 200 mm |
|---|
| Thickenss | 0.5mm to 500mm Diameter |
|---|
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA
Finish supplier |
|---|
| Length | 1000 mm Long To 6000 mm Long |
|---|
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
|---|
Standard | ASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,
DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216, BS3605,
GB13296 |
Material | 304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L,
316N,201,
202 |
Surface | Polishing,annealing,pickling,bright |
Type | hot rolled and cold rolled |
stainless steel round pipe/tube |
Size | Wall thickness | 1mm-150mm(SCH10-XXS) |
Outer diameter | 6mm-2500mm (3/8"-100") |
C1050 Carbon Steel Equivalents
There are some other steel standards and steel grades similar and
equivalent to C1050 Carbon Steel Grade, as shown below:
- BS EN 10083 C50E/1.1206,
- JIS 4051, S50C
- EN-8 / BS 970 080M50
Chemical Requirements, Composition, %
| Standard | Grade | C | Mn | P | S | Si |
| ASTM A29 | 1050 | 0.48-0.55 | 0.60-0.90 | 0.040 max | 0.050 max | 0.10 max |
Mechanical properties
| Standard | Steel Grade | Yield strength MPa (>=) | Tensile strength MPa (>=) | Elongation % (>=) | Reduction of area % (>=) | Hardness Brinell |
| ASTM A29 | 1050 | 580 | 690 | 10 | 30 | 197 |
Quality Assurance
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
PROCESSING
FORGING
C1050 is forged from 2200ºF (1205ºC) down to a temperature in the
range 1650-1700ºF (900-925ºC.). The actual forging and finishing
temperatures will depend on a number of factors, including overall
reduction during forging and complexity of part being forged.
Experience alone will determine near exact values for these two
parameters. Parts are air cooled after forging.
HEAT TREATMENT
ANNEALING
Full annealing of small C1050 forgings is carried out from
1450-1600ºF (790-870ºC)
followed by furnace cooling at 50ºF (28ºC) per hour, to 1200ºF
(650ºC) soaking and air cooling.
NORMALIZING
The normalizing temperature range for this grade is typically
1650-1700ºF (900-925ºC.)
Normalizing is followed by cooling in still air. When forgings are
normalized before hardening and tempering or other heat treatment,
the upper range of the normalizing temperature is used. When
normalizing is the final treatment, the lower temperature range is
used.
HARDENING
Hardening of this grade is carried out from an austenitizing
temperature of 1500-1600ºF (820-870ºC) followed by oil or water
quenching.
Flame and induction hardening may be carried out by heating quickly
to the desired case depth and quenching in water or oil. This
should be followed by a tempering treatment at 300-400ºF
(150-200ºC) to reduce stresses in the case, without affecting its
hardness. A surface hardness as high as Rc 61 may be obtained from
C1050 by this treatment.
TEMPERING
Tempering after normal hardening and oil or water quenching is
carried out at 750-1260º F (400-680ºC) to give the required
mechanical properties as determined by practical experience.
MACHINABILITY
Machinability of C1050 is good providing the full annealing cycle
described above is used, A coarse lamellar pearlite to coarse
spheroidite microstructure gives optimum machinability in C1050.
WELDABILITY
This grade is readily welded with the correct procedure. Welding in
the through-hardened or flame or induction-hardened conditions is
not recommended.
Low-hydrogen electrodes are recommended together with preheat at
300-800ºF (150-430ºC to be maintained during welding, Cool slowly
in sand or ashes and stress relieve where possible. It may be that
in certain instances normalizing may be called for after welding.
What we can offer?
-We offer a wide range of steel products in a wide variety of
dimensions and executions, according to the common international
specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Shape Available
- Solid round bar
- Flat bar
- Square bar
- Hexagon bar
- Block
- Plate
- Sheet
- Wire rod
- Strip
Our Advantages
- High mechanical property and quenching, enable the surface share
equal hardness after deal with it
- Good polishing and low roughness
- Making the heat-treatment to harden condition before using it
- Competitive price
- Fast production lead-time
- All the material are inspected with 3 times to meet the highly
standards
- Pure steel quality & stable quality to be guarantee
OUR MAIN PRODUCTS ARE LISTED AS BELOW
Notes:
Available Size:
-Round: Dia. 4 -1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized
items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk
orders, by airfreight or express for samples
COMPANY INFORMATION
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china
and serve the global engineering steel market. Our company has more
than 15 years of experience in steel researching, production,
managing and sales. And our team mostly are based on and worked in
national famous steel enterprise.
In the aspect of resources and information, we have established
cooperative and stronger relationship with nearly hundred
enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business
relationship with dozens of steel company, Sharing and holding
equities with several steel enterprises. Because of the close
cooperation with steel companies and our pioneering spirit, which
can ensure us stay at the top competition, and ensure our customers
get what they really want!
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and
trading company. We specialized in special steel which include
alloy structural steel and carbon steel and stainless steel, etc.
All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party,
such as TUV, CE, if you need. Secondly, we have a complete set of
inspection system and every process is checked by QC. Quality is
the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our
warehouse. If the material doesn't have stock, the delivery lead
time is about 5-30 days after receiving your prepayment or firm
order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you
come to China and arrange our driver to our airport to pick you up
when you come.
CONTACT US
We are happy to answer your questions and make you an offer for
these and other materials. Contact us now for more information.
Your Contact Person
Ms Chilli Ho
Phone/Wechat/Whatsapp +86-181-0187-5575
Skype: chilli.ho@outlook.com
Email: chilli.ho@shunitesteel.com
